For any Jeep Wrangler owner, especially those who venture off-road, the question of where to stash essential recovery gear like a Hi-Lift jack is a perennial challenge. I remember grappling with this exact problem myself. A Hi-Lift jack isn’t just a tool; it’s a necessity for airing up or down, changing a tire on uneven terrain, or performing minor lifts for trail repairs. Leaving it loose in the cargo area is impractical and unsafe, while many exterior mounting options expose it to the elements and potential theft. Finding a secure, accessible, and unobtrusive spot was paramount; neglecting this meant risking damage to the jack, losing valuable interior space, or facing a recovery situation without the right tool readily available.
Anyone looking to equip their Jeep Wrangler for serious adventuring quickly realizes the need for reliable recovery equipment. A Hi-Lift jack is often at the top of this list, offering versatility beyond just lifting. However, its awkward size and weight make proper storage crucial. You need a way to transport it securely, keeping it out of the way but within easy reach when needed. The ideal candidate for a dedicated jack mount is a Jeep owner who frequently hits the trails or simply wants to be prepared for roadside emergencies, understands the value of secure storage, and has limited interior or exterior space.
However, a dedicated jack mount isn’t for everyone. If you rarely take your Jeep off-road, primarily use it for commuting, or don’t own a Hi-Lift jack, then investing in a specialized mount is likely unnecessary. You might be better served by simply keeping a standard bottle jack or scissor jack in your vehicle’s storage compartment.
When considering a Jeep Wrangler jack mount, several factors should weigh into your decision:
* Mounting Location: Do you prefer the jack mounted externally (hood, bumper, exterior roll cage) where it’s visible but exposed, or internally (inside roll cage, cargo area) where it’s protected but uses interior space?
* Accessibility: How quickly and easily do you need to access the jack?
* Security: Can the jack be locked to the mount to prevent theft?
* Protection: Will the mount protect the jack from weather, mud, and debris?
* Fitment: Is the mount specifically designed for your Jeep model and year (e.g., JL 4-door)?
* Installation: How complex is the installation process? Does it require drilling or permanent modifications?
* Rattling/Noise: Will the mount and jack create annoying noise while driving?
* Weight Distribution: Does the mount add excessive weight to vulnerable areas like the tailgate?
Keeping these points in mind helps narrow down the options and find a mount that perfectly suits your needs and your Jeep’s setup.
- Hi-Lift jack, shovel, axe and Jeep not included
- PLEASE SEE ADDITIONAL FI ENT DETAILS IN THE DESCRIPTION BELOW
- Does not fit Jeep JK This is the JL version; A JK kit is also available
Introducing the Dominion OffRoad Stealth Jack Mount
Enter the Best Jeep JL 4-Door Wrangler Hi-Lift Jack Mount kit – Stealth by Dominion OffRoad. This product offers a clever solution for mounting a standard Hi-Lift jack discreetly and securely inside your Jeep JL 4-Door Wrangler. The promise here is simple yet effective: provide a high-quality, easy-to-install mount that keeps your jack protected from the elements and out of sight, while remaining easily accessible when needed.
What you get with the kit is the necessary brackets and hardware to attach the mount directly to your vehicle’s internal roll cage. Unlike some exterior mounts that advertise visibility, this Dominion OffRoad mount takes the opposite approach, aiming for a clean, almost factory-like appearance once installed, tucked up high near the roofline. It’s designed specifically for the JL 4-Door model, addressing the challenges of mounting recovery gear in the latest generation of Wranglers. This distinct focus sets it apart from universal mounts or those designed for previous JK generations.
This specific Dominion OffRoad kit is explicitly for owners of the Jeep JL 4-Door Wrangler who prioritize an interior, protected, and stealthy mounting location for their Hi-Lift jack. It’s ideal for those who worry about theft, weather damage to their jack, or adding unnecessary weight to the tailgate. It is *not* for owners of the Jeep JK (a separate kit is available for that model), 2-door JLs, or those who prefer a highly visible, exterior mounting solution.
Here are some notable aspects of this product:
Pros:
* Extremely easy and quick installation.
* Mounts the jack inside the vehicle, protecting it from weather and theft.
* “Stealth” design keeps the jack high and out of the way, preserving cargo space.
* Does not add stress or weight to the tailgate or body panels.
* Allows for the possibility of locking the jack to the mount.
* High-quality construction feels durable and secure.
Cons:
* Requires minor trimming of interior plastic trim pieces for a flush fit.
* The jack itself might rattle against the mount on bumpy roads (though user-fixable).
* Uses a very small amount of upper interior space (though negligible for most).
- Pair of 3 Ton (2.7 metric Ton) jack stands with 6,000-pound capacity
- Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
- Specifications:2 ton (4,000 lb) capacity for single jack stand; Lifting range from min 9.8 " to max 15"; Net weight: 10.5 lb, which suitable for most 2 Ton Low profile autos, not recommendable for...
Capabilities and Advantages
Having used the Dominion OffRoad Stealth mount for a significant period, I can confidently speak to its performance and benefits. The design is truly well-thought-out for its intended purpose – secure, interior storage.
Stealthy Interior Mounting
One of the standout features, and the reason for the “Stealth” in its name, is the interior mounting location. Unlike hood or bumper mounts that put your Hi-Lift jack on full display (and exposed to the elements), this mount tucks it up high, snugly against the rear sport bar. This is a major benefit for several reasons. Firstly, it keeps your jack out of the rain, snow, mud, and sun, which significantly extends its lifespan and ensures it’s ready to go when you need it, free of rust and seized components. Secondly, it makes your valuable recovery tool less visible to potential thieves. While nothing is foolproof, having the jack inside and requiring entry to access it is a considerable deterrent compared to an external mount. The high position also means it doesn’t intrude on your lower cargo space, leaving the rear area of your JL free for gear, groceries, or pets. It’s amazing how much space is saved by getting that long, heavy jack off the floor.
Secure Roll Cage Attachment
The integrity of any mount comes down to how it attaches to the vehicle. The Dominion OffRoad mount scores highly here by bolting directly to the sturdy, structural roll cage of the Jeep JL. This is a far more robust attachment point than mounts that rely solely on body panels or tailgate hinges, which can suffer from added stress and vibration over time, especially with the weight of a Hi-Lift jack bouncing around on rough trails. The secure connection means the mount itself doesn’t flex or wobble, providing a stable platform for the jack even during dynamic driving conditions. This sense of security is palpable; you know the jack isn’t going anywhere.
Effortless Installation Process
Honestly, I was braced for a complicated installation, as many Jeep modifications can be. However, this Dominion OffRoad mount was surprisingly straightforward. The instructions were clear, and the process involved minimal steps. It essentially requires removing a couple of plastic trim pieces covering the roll cage, bolting the mount brackets into existing holes on the cage using the provided hardware, and then lifting the jack into place and securing it with a bolt on one side and a bolt and nut on the other. It took less time than gathering the tools. This ease of installation means you don’t need specialized mechanical skills or a full workshop. It’s a job easily done in your driveway with basic hand tools, which is a huge plus for anyone who prefers DIY projects.
Protection from the Elements and Security
As mentioned earlier, keeping the Hi-Lift jack inside is perhaps the biggest functional advantage. Mud, water, road salt, and UV rays can quickly degrade a jack left exposed on the exterior. This mount ensures your investment stays clean, dry, and protected. Beyond weather, the interior location is a significant security feature. While determined thieves exist, they are far less likely to break into a vehicle to steal a jack that isn’t even visible from the outside, compared to simply unbolting one from a hood or bumper mount. The mount also provides a dedicated tab on one side that aligns with the holes on most standard Hi-Lift jacks, allowing you to easily secure the jack with a padlock. This simple addition offers excellent peace of mind, especially when your Jeep is parked unattended.
Minimal Obstruction and Space Saving
Despite being an interior mount, the design cleverly places the jack high up, paralleling the roofline. This means it doesn’t impede your rear visibility through the rearview mirror, a common concern with some interior mounts that place the jack lower down or vertically. Furthermore, it doesn’t consume valuable floor space or block access to your cargo area or rear seats. The vertical clearance beneath it remains open, allowing you to load gear, coolers, or anything else you need for your adventures without having to work around the jack. It effectively utilizes otherwise unused space high up near the ceiling.
Addressing the Plastic Trim Modification (Disadvantage)
One point that consistently comes up, and something I experienced, is the need to modify the factory plastic trim pieces that cover the roll bar. The mount brackets are designed to bolt directly to the metal roll cage, and their thickness prevents the plastic trim from fully seating back into place over them. The instructions recommend trimming a section of the plastic to accommodate the bracket. While this might sound daunting, it’s surprisingly easy. Using a sharp utility knife, a small saw blade (like on a multi-tool), or even a Dremel, you can quickly cut out the necessary notch. Smoothing the edge with a file or sandpaper takes minimal effort. Once trimmed, the plastic snaps back into place securely, and the modification is barely noticeable unless you know exactly where to look. While it’s a minor inconvenience and requires a bit of extra work, the end result is a clean, factory-like fit for the trim pieces, rather than having them loose or needing to leave them off entirely.
Managing Potential Jack Rattle (Disadvantage)
Another minor issue, which isn’t strictly a flaw of the mount itself but rather the nature of carrying a large, metal tool like a Hi-Lift jack, is the potential for rattling. On rough roads, the metal parts of the jack can sometimes vibrate against each other or the mount. This is particularly true for the handle mechanism. However, users have found simple, effective solutions. A common fix is to use zip ties or velcro straps to secure the jack handle firmly against the main body. Others have applied felt tape or rubber strips to the contact points between the jack and the mount, or between the jack’s own moving parts. These simple modifications effectively dampen vibrations and eliminate rattling, resulting in a silent ride even off-road. While it would be nice if the mount inherently prevented *all* jack noise, these easy user-applied solutions make it a non-issue.
Secure Jack Attachment Points
The method of securing the jack to the mount is robust and straightforward. The jack is held in place by a bolt and nut on one side (typically through the main body of the jack) and a single bolt that passes through a tab on the mount and a hole in the jack’s lifting mechanism on the other side. This two-point attachment prevents the jack from shifting or coming loose, even on very bumpy terrain. As mentioned, the design also includes a strategically placed hole on the right side tab that aligns perfectly with a corresponding hole on many Hi-Lift jacks, allowing for the insertion of a standard padlock. This simple but effective locking mechanism adds a crucial layer of security against opportunistic theft, making this mount an even better option for protecting your valuable recovery gear.
Hearing from Fellow Owners
After installing the Dominion OffRoad mount, I looked online to see what other users thought, and the feedback consistently mirrored my own positive experience. Many highlighted the incredibly easy installation process, often remarking that it took less than 15-20 minutes. Owners appreciated how the mount keeps the jack stored internally, protecting it from the elements and potential theft. The sturdiness of the mount once installed was frequently mentioned, with users confirming there was no movement or noise from the mount itself, only potential minor rattling from the jack which was easily fixed. The stealthy, high-up placement that doesn’t obstruct views or use valuable cargo space was another recurring point of praise, often compared favorably to external or bumper-mounted alternatives. Even the required plastic trimming was deemed simple and quick, leaving a clean look. The consensus seems to be that this mount is a high-quality, practical, and aesthetically pleasing solution for carrying a Hi-Lift jack in a JL 4-Door Wrangler.
Summing it Up
Ultimately, the problem of carrying a large, necessary tool like a Hi-Lift jack safely and conveniently in your Jeep Wrangler is one that absolutely needs a solution. Leaving it unsecured creates a hazard, and neglecting its protection from the elements shortens its lifespan, leaving you potentially stranded when you need it most. The complications of not having a reliable mount range from lost cargo space and rattling noise to damaged gear or being unprepared for a trailside emergency.
The Best Jeep JL 4-Door Wrangler Hi-Lift Jack Mount kit – Stealth by Dominion OffRoad stands out as a great fit to solve this problem. Firstly, its stealthy interior mounting protects your jack from weather and theft, ensuring it’s ready when you are. Secondly, the robust roll cage attachment and secure jack fastening provide a solid, rattle-free (with simple user fixes) storage location that doesn’t compromise visibility or cargo room. Finally, the incredibly easy installation makes this a modification anyone can tackle, quickly getting your essential recovery gear stored safely and effectively. If you own a JL 4-Door Wrangler and carry a Hi-Lift, this mount is definitely worth considering. To learn more and check it out for yourself, Click here to check out the Dominion OffRoad Best Jeep JL 4-Door Wrangler Hi-Lift Jack Mount kit – Stealth.
Last update on 2025-08-22 / Affiliate links / Images from Amazon Product Advertising API